
Product Overview
Zhimetao SGR10W is a non-ionic water-soluble cellulose ether made from natural cellulose materials, with a viscosity of 43000cps to 50000cps.
Main components	HPMC
Additives	None

Technical requirements

Appearance	White powder, odorless and tasteless
Methoxy content	19.0～24.0%
Hydroxypropyl content	4.0～12.0%
Viscosity	43000～50000cps (2% water solution, 20±0.2℃, Brookfield RV viscometer, 20rpm)
Drying loss	≤8.0%
Burnt ash	≤3.0%
pH value	5.0～9.5 (1% water solution)
Gel temperature	≥70℃
fineness	80 mesh pass rate ≥ 90%

Scope of application

Gypsum, cement mortar and putty water retention thickener

Main areas of application

- Especially suitable for putty, cement mortar, tile adhesive.

Main performance

- odorless and tasteless
- Low ash content
- High gel temperature
- High water retention
- Medium to high viscosity
- Anti-salting

Blending of cellulose ethers

The SGR10W of Zhimei Hall can be mixed with other dry materials in the marketable mixing equipment to produce powdery finished products, but it must be fully mixed. When mixing powdery finished products, the required amount of mixing water is usually added to a suitable container and then the powdery dry-mixed materials are added while stirring. Excessive mixing can introduce excessive bubbles. The mixture should be left to stand for a moment before use. The standing time is about 1 to 5 minutes depending on the performance of other additives.

Packaging and storage

Standard packaging: 25kg paper bag packaging, lined with polyethylene film bag.
Special packaging requirements can also be met with other types of packaging.

The basic principle is to suggest storing Zimei Tang SGR10W indoors in a cool, dry, ventilated place and using it within 6 months. If the packaging bag is stacked, damaged, or left open for too long, it may cause clumping.

Quality, safety and environmental protection

This product is not a hazardous chemical, it is recommended that all users read the product safety instructions carefully.

Product liability

The above information and suggestions are based on our experience, for reference only, and they cannot replace the experiments conducted by the customer himself. Since Zhimei Tang Company can not control the transportation, storage, handling and use conditions after the product is sold, the quality accident and economic dispute caused by improper use can not be attributed to the suggestions provided by us. In any application, the customer shall bear the obligation to comply with the intellectual property rights of third parties.

Technical information shall not be provided to third parties without our consent.