
Product Overview
Zhimeitang S760 is made by low-temperature grinding of imported inorganic minerals and high-molecular organic materials.
Main ingredients	Inorganic minerals, polymer organic materials

Technical Requirements

Appearance	White or off-white powder, odorless and tasteless
Fineness	100 mesh pass rate ≥90%
pH value	6 to 9 (1 percent aqueous solution)
Weight loss on drying	≤5%
Bulk density	550g/L to 850g/L

Application range

Suitable for various cement-based, gypsum-based mortar flow systems such as self-leveling, grouting materials, etc. Main application scope - Especially suitable for sand-containing gypsum-based self-leveling or self-leveling with a higher gypsum density.

Main performance

- Low dosage.
- Good suspension.
- Minimal flow loss.
- No bleeding.
- Smooth appearance, no pinholes.
Packaging and storage

Standard packaging: 25kg paper bag, lined with polyethylene film bag.
Other types of packaging are also available upon special request.

The basic principle is that Zhimeitang S760 should be stored indoors in a cool, dry, well-ventilated place and used up within six months. Clumping may occur if the packaging bags are piled up under pressure, damaged or left open for too long.

Quality, safety and environmental protection

This product is not a hazardous chemical. All users are advised to read the product safety instructions carefully.

Product Liability

The information and advice above are based on our experience and are for reference only. They cannot replace experiments conducted by customers themselves. Since Zhimeitang Company has no control over the transportation, storage, handling and usage conditions of the products after they are sold, quality accidents and economic disputes arising from improper use cannot be attributed to the advice provided by us. In any application, the customer is obligated to comply with the intellectual property rights of third parties.

Without our consent, technical information may not be provided to any third party.