
Product Overview
Zhimeitang 210P is an odorless and dust-free amino acid retarder.
Main ingredients	Imported polymeric amino acid polymers
Additives	Mineral anti-caking agent

Technical Requirements

Appearance	White or off-white powder
Bulk density	550g/L to 750g/L
pH value	6 to 8 (1% water dispersion)
Drying weight loss rate	≤5%

Application scope

For retarding of various α - or β -type gypsum-based mortars such as natural gypsum, desulfurized gypsum, phosphogypsum and mixed paste.

Main application scope

- Especially suitable for plastering gypsum, gypsum-based self-leveling mortar, etc.

Main properties

- Standard linear retarder.
- Imported raw materials, good stability.
- Versatile, suitable for both alpha and beta types of gypsum.
- Moderate dosage, precise retarding time, short interval between initial and final setting.
- It can effectively solve the problem of long final setting time or no setting of phosphogypsum.

Packaging and storage

Standard packaging: 25kg double-layer laminated packaging, lined with polyethylene film bag.
Other types of packaging are also available upon special request.

The basic principle is that Zhimeitang 210P should be stored in a dry place with a temperature below 42 ° C, avoid exposure to high temperatures or high humidity, and be used up within six months. Clumping may occur if the packaging bags are piled up under pressure, damaged or left open for too long.

Quality, safety and environmental protection

This product is non-toxic. All users are advised to read the product safety instructions carefully.

Product Liability

The information and advice above are based on our experience and are for reference only. They cannot replace experiments conducted by customers themselves. Since Zhimeitang Company has no control over the transportation, storage, handling and usage conditions of the products after they are sold, quality accidents and economic disputes arising from improper use cannot be attributed to the advice provided by us. In any application, the customer is obligated to comply with the intellectual property rights of third parties.

Without our consent, technical information may not be provided to any third party.